LB-1 kaolinic FCC catalyst LB-1 - Names and Identifiers
LB-1 kaolinic FCC catalyst LB-1 - Physico-chemical Properties
| Physical and Chemical Properties | The appearance is white and yellow, the diameter is 20~100 μm microspheres, the bulk density is 1020kg/m3, the specific surface is 306 m2/g, the pore volume is 0.28 cm3/g, the sieve composition of the catalyst is:<40 μm,22% (mass),40~80 μm, about 60% (mass),>80 μm,<18% (mass). The micro-reactive activity was 68% (mass) (treated at 800 ℃ for 17h with 100% steam). |
LB-1 kaolinic FCC catalyst LB-1 - Introduction
All-white clay cracking catalyst is a commonly used catalyst with the following properties and uses:
Nature:
1. appearance is white powder or granular.
2. chemical composition is mainly alumina and silicate.
3. with high surface area and pore structure, has good adsorption performance.
4. Excellent high temperature resistance, able to withstand high temperature reaction conditions.
Use:
1. Mainly used in the field of petroleum and chemical catalytic cracking reaction. It can catalyze the conversion of heavy oil or high boiling point hydrocarbons into light hydrocarbons, such as gasoline, diesel and liquefied petroleum gas.
2. widely used in catalytic heavy oil desulfurization, denitrification and dewaxing process.
Preparation Method:
1. select high quality natural clay, after crushing, screening and other processing.
2. mix the clay with the appropriate amount of additives (such as sodium salt, iron salt), and then add the appropriate expansion agent and binding agent.
3. After wet or dry granulation forming, and then calcined to obtain the final clay-type cracking catalyst.
Safety Information:
1. the preparation and use of the process need to pay attention to protective measures, such as wearing gloves, masks and goggles.
2. Avoid inhalation, ingestion or contact with skin and eyes during the use and handling of the catalyst.
3. Waste treatment shall comply with relevant laws and regulations, and the waste shall be handed over to a qualified treatment unit for treatment.
4. storage should avoid contact with acid, alkali and other substances, to prevent the catalyst moisture deterioration.
5. in case of inhalation or post-exposure discomfort, seek medical attention immediately.
Last Update：2024-04-09 19:05:38